4 channel car amplifier wiring diagram: Compact Amplifier CK75.4

Issuing time:2020-01-04 13:54

CONNECTING THE AMPLIFIER

Select cable and fuse according to the following table.


MODEL

CK75.4

CK600.1

CK1200.1

CK1800.1

CK2000.1

CABLE

6-4

4

4

4-2

0-2

FUSE

60A

60A

100A

150A

200A


Connect the amplifiers ground cable to a close, bare metal part of the frame or chassis. Use a nut and bolt, NOT a screw! The ground cable must be at least the same size as the +12volt cable.

    Connect the remote terminal to remote output of the head unit using 16 gauge (or er) wire.

    Connect the fuse holder within 18”(45cm) of the car battery, and run the selected from this fuse to the amplif er.

    Connect all the inputs with high-quality cables. Connect Remote   Control   if   ssary.

Insert fuse(s) into the battery fuse holder(s).

        If using the rear channel of the CK75 for a Subwoofer, Bridge the channels by using eft “+” and the Right “- terminals.

   

WIRE DIAGRAM

1. CK75 4-Channel mode

1.jpg2.jpg





2. CK600 / CK1200 / CK1800 single woofer load (Example of CK1800)

(Please note: CK600 4Ohm minimum)

   

4.jpg3.jpg

3. CK2000 one subwoofer wiring

   

3.jpg4.jpg


Share to:
Address

F2,Building 1 Deng Wu Industry Park, Qiaolong Rd. 582, Qiaotou Tow, Dongguan, Guangdong

Phone +86 186-0300-8861
       (Wechat ID yubaudio)
Email

sales@yubaoaudio.com